Building a 650+ whp 2000 gsr Daily Driver

[amimaxima]

2000 acura integra gsr fully built motor. this is a daily driver car. we are shooting for 650+ on c16 and meth. its going to be dual mapped dd map 93 and meth and race map c16 and meth.

http://i439.photobucket.com/albums/qq117/k20tek/DSCI0091.jpg
http://i439.photobucket.com/albums/qq117/k20tek/PICT5738.jpg
83mm sleeved gsr block
http://i439.photobucket.com/albums/qq117/k20tek/PICT5733.jpg
http://i439.photobucket.com/albums/qq117/k20tek/PICT5734.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0043.jpg
cp 9.5:1 pistons
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0004-2.jpg
eagle rods
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0008-1.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0047.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0009-1.jpg
acl race bearings
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0017.jpg
golden eagle head gasket
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0018.jpg
golden eagle cam seal
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0016.jpg
golden eagle fuel rail
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0034.jpg
(not using the B&M fpr)
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0035.jpg
lht vacuum port
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0066.jpg
crower stage 2 turbo cams (not going to be using these on the build)
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0072.jpg
super tech valves springs and retainers
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0096.jpg
edelbrock victor x intake manifold
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0093.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0101.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0102.jpg
this is what $500 will buy you at acura with an employee discount.
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0103.jpg
precision sc62 billet compressor wheel
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0001-1.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0015.jpg
painted the block
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0135.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0134.jpg

http://i439.photobucket.com/albums/qq117/k20tek/DSCI0146.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0147.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0150.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0151.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0153.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0155.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0156.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0157.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0158.jpg
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0159.jpg

supertech dual valve springs, titanium retainers, intake and exhaust valves, bronze valve guides, and valve seals
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0162.jpg

got a new compressor housing and turbine for the sc62

larger anti surge holes
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0165.jpg

4 bolt flange
http://i439.photobucket.com/albums/qq117/k20tek/DSCI0167.jpg
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0222.jpg

just so everyone knows im not going to be using the b&m afpr.
parts that I still need to get :
bosch 1000cc injectors
3 bar map sensor
aeromotive afpr
tial 50mm blow off valve
tial 44mm wastegate
spoolin performance ac compatible ramhorn manifold
spoolin performance downpipe
spoolin performance dumptube
lsd unit for the gsr transmission
golden eagle cam gears
oil pressure gauge
boost gauge
wideband
hondata s300
breather kit


fuel setup
walbro 255hp lph intank
bosch 044 300 lph inline
both pumps wired with bosch relays to the battery
aeromotive afpr 13101
summit racing liquid filled 100psi fuel pressure gauge
golden eagle fuel rail
bosch 1000cc injectors

got bored today and powder coated the upper and lower power steering bracket, upper and lower altenator bracket, drivers side motor mount bracket, throttle cable bracket, sc62 turbine, and a friends h22 log manifold

http://i46.photobucket.com/albums/f127/amimaxima/DSCI0191.jpg
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0192.jpg
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0199.jpg
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0196.jpg
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0193.jpg
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0190.jpg

[SecondToNone317]

good shit, can't see pics at work but nice list of parts

[UNKOWN]

i was thinking of a integra but ehh

[TUKO]

very nice.

[2002WhiteMaxima]

niceeeeeeee

[VIP Maxima]

nice nice but what are the plans for traction?

[TBb15]

damn, much props

[amimaxima]

nice nice but what are the plans for traction?

skunk2 pro s coilovers, lakewood traction bars and mt et drag slicks

[streetuner]

sounds sweet..cant wait to see the end result

[SHIFTVQ35]

nice nice but what are the plans for traction?Trust they make everything for these guys traction is not a problem, there is a 625whp ek coupe in my neighborhood and he had no problems giving folks the biz @ all.

*Sighs* it's a honda world.........

[STuNtMAN]

shit looks like its going to be a monster keeps us updated with new stuff GL with everything

[Xtinct]

skunk2 pro s coilovers, lakewood traction bars and mt et drag slicks


lol nothing quite like a daily driver with slicks

[VIP Maxima]

Trust they make everything for these guys traction is not a problem, there is a 625whp ek coupe in my neighborhood and he had no problems giving folks the biz @ all.

*Sighs* it's a honda world.........

i know that but its still FWD

[Digital]

Definitely a honda beast!

[shift_twinz]

yea that shit is gonna be problems on the street...good luck with the build...hopefully ur done with it by spring time then u can come through and show everyone wut ur working with...i know a couple of teggy's that put down serious numbers....i was witness to one of them loosing a police charger...small car..that fits anywhere plus crayz fast..u can go alot of places

[Boost Infection]

Definitly build worthy

[amimaxima]

let me clear a few things up. this car is a daily driver. it will be driven to work school and the store. just because it has 650+ whp doesnt mean its going to be driven around DD 650 whp. It will be driven around on the 93 meth map which should be about 500-550 whp. and the cars full potential will be used at the track on slicks. (c16 meth map)

[2themax05]

Dammm this shz gonna be official business.. Every corner covered.

[boostingwild]

nice car ... clean look .. good part list ... good luck with build

[amimaxima]

im waiting on the machine shop to finish the P&P on the head

[yo its ok]

you should use the fullblown racing dual walbro kit in your car, instead of a walbro suplemented with a inline pump w/ halman switch.

Good luck on your build. I have a good base map for your S300 for 1000cc, Motec 3 Bar.
Idles real nice @ 14.6-7 and partial driving up to 5000 before VTEC kicks in. Thats up to your tuner.

Drop us a line if you need any help.

www.rpmnyc.com

[amimaxima]

crower stage 2 turbo cams (for sale $450)
super tech valves
super tech dual valve springs
super tech titanium retainers
super tech bronze valve guides

7 angle valve job
port & polish
gasket match
combustion chamber cut to 83mm

http://i46.photobucket.com/albums/f127/amimaxima/DSCI0238.jpg

exhaust port
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0240.jpg

intake port
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0244.jpg

http://i46.photobucket.com/albums/f127/amimaxima/DSCI0242.jpg

http://i46.photobucket.com/albums/f127/amimaxima/DSCI0246.jpg

http://i46.photobucket.com/albums/f127/amimaxima/DSCI0247.jpg

arp head studs
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0249.jpg

http://i46.photobucket.com/albums/f127/amimaxima/DSCI0250.jpg

http://i46.photobucket.com/albums/f127/amimaxima/DSCI0252.jpg

I know the valve cover is dirty but I was dying to see what she was going to look like. I'll clean her later
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0254.jpg

I'm not going to be using the B&M fuel pressure reg. It's for sale $65
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0256.jpg

[2002WhiteMaxima]

looking good

[450sx]

damn reminds of my one boys teggy. Nice lookin build

[TUKO]

wats the eta on th car being finished?

[STuNtMAN]

damn cant wait to see the results when finished

[amimaxima]

^ idk i've already spent $5500 on parts and im only half way there.

[STuNtMAN]

damn lol well looks like its gonna turn out great

[maximariceboi]

very nice...but i dont like how you did honed the cylinders =/ crosshatch doesnt look too good IMO. but nice work! and + 1 on the super tech dual valve springs!

[maximariceboi]

^ idk i've already spent $5500 on parts and im only half way there.

damn..honda parts are cheap! lol

[Black Trunk]

You might want to consider an equal lenght manifold for that beast, but other than that it looks good.

[yo its ok]

K24-K20 Full Race Turbo Kit
http://farm4.static.flickr.com/3263/3133708838_ac81f35357.jpg?v=0

[amimaxima]

im going to be using a spoolin performance ranhorm manifold and why are you showing me k series parts?

[Mr SpecVQ]

go0d move...this should be a beast !

[amimaxima]

ordered a bunch of parts today :

tial 44mm wastegate
tial 50mm blow off valve
tial 50mm flange
golden eagle cam gears
aeromotive fuel pressure regulator 13101
hondata 4 bar map sensor
hondata boost solenoid (boost by gear ;D)

[PanaView ©]

ooooooOOOOoooooo Ahhhhhhhhhhhhhhhhh

[STuNtMAN]

damn you better keep us up to date on this beast

[amimaxima]

im trying but i still need thousands of dollars worth of parts to finish this

[STuNtMAN]

^^well then get those thousands of dollars and do it lol

[amimaxima]

ya lol

[c max]

nice work there, i had a kid up by me killing everything on the road till he got locked up and they took the car. would like to see some numbers at the track when its done, should be interesting.

[jbaker1121]

shit's weak. just kidding

[yo its ok]

im going to be using a spoolin performance ranhorm manifold and why are you showing me k series parts?

would rather go K than stick to B... unless

http://memimage.cardomain.com/ride_images/3/2385/3401/30961700120_large.jpg

883whp 28psi still have some more room to go :)

[MyRolla]

good luck, better than seeing all these half assed hondas on the streets who are too scared to get in the block with anything but ctr pistons post a dyno sheet when ur done

[Qmax03]

good luck ... this will be fun .

[amimaxima]

tial 44m wastegate
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0069.jpg

boost solenoid
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0066-2.jpg

golden eagle cam gears
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0068.jpg

hondata 4 bar map sensor
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0067.jpg

[yo its ok]

sexy simply sexy

[amimaxima]

aeromotive fuel pressure reg with summit gauge
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0146.jpg

earls 8an fuel filter
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0151.jpg

this is how the rail, reg and filter are going to be setup i just need to get fittings to connect everything
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0160.jpg

tial 50mm bov
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0154.jpg
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0155.jpg

the twins
http://i46.photobucket.com/albums/f127/amimaxima/DSCI0159.jpg

[erdoganog]

Props to you man!!! guys like you make the honda label look better i just wished there wasn't so many ricers out there :D

[STuNtMAN]

was the status i wanna see more of the mean machine